Mars L80N MT
Isodiametric tractors, reversible, with steering wheels configured in haymaking version. Stage 3B engine, 75 HP
The Mars L80N MT are tractors with steering wheels made in the version for mowing fodder, especially in sloping areas.
The structure is characterized by a low centre of gravity for maximum stability on slopes without sacrificing the ground clearance for a rational flow of the mowed fodder under the machine.
The Dual Floating System
optimizes the load on the ground of the equipment applied to the third point, promoting its 'floating'.
Particular attention has been paid to the driver’s comfort: 4 post rops and approved cabins make for a practical and comfortable driving experience.
||Nominal speed (rpm)
||No. of cylinders
||Maximum torque (Nm/rpm)
||Kohler KDI 2504 TCR
||55,4 / 75,3
||300 / 1,500
tractors have a 2.4 lt Kohler engine which develops 75 HP, with a powerful maximum torque of 300 Nm@1500 rpm
Turbocharged by a Turbo Intercooler, it is equipped with an EGR system alongside a DOC catalyst to reduce emissions and enhance operational efficiency. Thanks to the absence of the DPF particulate filter the regeneration is not necessary
The engine rpm electronic management
has been entirely developed by BCS Group; it is fast and precise, through the dashboard located at the right of the steering wheel and operates: speed increase and decrease, set speed setting and recalling, electronic governor switching off and shifting to idle speed.
Transmission and gearbox
The transmission of Mars L80N is fitted with the OS-Frame chassis.
The joint in the middle of the machine lets the front axle oscillate up to 15° with respect to the rear axle, for excellent stability on slopes, as the four wheels are always stuck on the ground.
The 32-speed synchronised gearbox (16 FWD + 16 REV) with synchronized reverser always allows right gear selection for the tasks for which the tractor is intended to.
The 'Long Life' clutch is multidisc in oil bath electronically-managed and hydraulic control with Pro-Act System. The reactivity of the clutch is adjustable on 4 levels.
The Mars L80N are equipped with planetary gear axles to minimize wheelbase of the tractor and increase its manoeuvrability.
The permanent 4-wheel drive allows exploiting the machine’s towing feature.
Pto and hydraulic system
The rear PTO is independent from the gearbox and synchronized with all progress speeds. PTO can be engaged by an electro-hydraulic control, it has a speed of 540/540E rpm.
The clutch is multidisc in oil bath.
The solid rear hydraulic lift by rams (optional with position and draft control) relies on multi-purpose practical and versatile couplings to adapt quickly and easily to all marketed equipments.
The hydraulic system consists of a double circuit with two independent pumps and dedicated heat exchanger: one of 29.5 l/min dedicated to the lift and distributors, the other of 13.5 l/min dedicated to the hydroguide and electro-hydraulic control.
Active and passive safety
The use in full safety both slopes and crosswise is guaranteed by the design geometry of Mars L80N tractors, having a low centre of gravity and a very good weight distribution on axles when the implement is coupled to the rear lift.
The braking system with multi disc wet brakes, act on the rear transmission.
Front and rear differential lock, electro-hydraulically controlled, allows the tractor to be always in traction.
Mars L80N are characterised by a compact and comfortable driving position
, which places it in a leading position when it comes to catering to the needs of the driver:
• adoption of suspended pedals
for comfortable and stress-free operation,
• reversible model with silent-block suspended platform
• option of homologated cabs
equipped with air conditioning and heating, to guarantee comfort inside, even during long work hours.
Visibility of the road and of surroundings is optimised thanks to the new compact engine bonnet.
Mars L80N can be equipped with reversible driving position: a few seconds are required to rotate by 180° the seat, the steering wheel, the console and brakes-clutch pedals so that the operator may work having the equipment in front of him and constantly be able to control the operations. This means: maximum security and comfort.
The multipurpose function of Mars L80N tractors is enhanced by the reversibility of the driving seat.
Just in 10 seconds the operator can rotate the driving platform by 180° (seat, steering wheel, dashboard, brake and clutch pedals), to work with a front-mounted implement and steadily supervising all working operations, favouring comfort and safety.
The evolution of the reversibility system has led to a remarkable lightening of the effort necessary to raise the seat. Thanks to a combination of gas springs and mechanical springs, lift the seat now requires a very low and constant effort.
Mars L80N can be equipped with approved cabins with air conditioning and heating.
Interiors are refined and the platform is hanging on silent-blocks; it’s completely independent from the tractor chassis. The cab has large windows, glass doors and sunroof giving the driver an excellent view of the equipment and road even when the driving platform is in reverse position.
The information indicated in this website is not binding. The models described may be modified, without notice, by the Manufacturer. The drawings and photos may refer to equipment that is either optional or intended for other countries.